eSPRESSO TK/CC FRAME
HFS-hydroforming Prolite 66 triple butted aluminium frame based around fast rolling yet durable 650B wheels and with commuting and leisure riding in mind. A higher front end and a compact geometry make for a more upright and extremely comfortable riding position. Battery positioned extra low for improved handling. Comes equipped with mudguards, rear rack, side stand, lock and lights.
FULLY EQUIPPED
The eSPRESSO TK & CC come fully equipped with fenders, kickstand, carrier and lights. Ready for any outing you can think of.
OPTIMISED CENTRE OF GRAVITY
Based on the central position of the battery in front of the seat tube and the low position of the Shimano motor, we were able to achieve an optimum centre of gravity. The low and well-positioned centre of gravity provides the bike with outstanding riding characteristics which are extremely important in particular in wave low step-through frames which have the tendency to chatter and jitter when power is applied.
650B WHEELS WITH BIG VOLUME TYRES
The decision to use 650B wheels with 2.2" city tread pattern tyres for the TK models and 2.25" off-road tread pattern for the CC models is not just a design feature but has more practical reasons. To add big volume tyres on an e-bike provides increased comfort but also extra traction and therefore more safety reserves. Small and even bigger bumps can easily be rolled over, and a big volume tyre provides more puncture protection compared to a narrow one.
INTERNAL CABLE ROUTING
Cables are routed through the frame to keep the look of the bike neat and uncluttered, whilst the cables are out of the airflow and protected from moisture and dirt.
EXCELLENT FRAME STIFFNESS
The outstanding frame stiffness has a strong influence on the riding characteristics of wave low step through frames. The tapered head tube, the large tube diameters, the forged motor bracket as well as the 142x12 mm through rear axle all contribute to achieve a safe and precise riding experience.
LOW STEP THROUGH
The Shimano mid-mounted motor in combination with the forged motor bracket provides the eSPRESSO CITY with one of the lowest step through heights in the market.
Specification | |
---|---|
Front light | Herrmans H-BLACK MR4 E |
Rims | MERIDA COMP TK 20mm inner width Aluminium |
Saddle | MERIDA EXPERT TK V-mount |
Seat clamp | MERIDA EXPERT |
Seatpost | MERIDA EXPERT TK 30.9mm diameter 15mm setback 40mm seatpost suspension travel |
Shift levers | Shimano Deore |
Spokes | Black stainless |
Tyres | Continental Contact Plus City 27.5x2.2" wire reflecting line |
Cassette | Shimano HG500 11-42 teeth 10 speed |
Pedals | VP VPE-891 |
Rear light | Herrmans H-Trace |
Carrier | RACKTIME RT MERIDA TK / CC |
Fenders | Sunnywheel SW-FA-311-65A(MSB) |
Kickstand | CL-KA100 |
Frame lock | Abus 5650 LH-3 lock |
Battery | Shimano E8010 504Wh Abus key battery lock |
Drive unit | Shimano E6100 60Nm |
Display | Shimano SC-E6100 |
Chain | KMC e10S |
Frame material | Aluminium |
Wheel size | 28 " |
Frame | eSPRESSO LITE 650 135x9mm axle standard external max. 504 Wh |
Gears | 10 X 1 |
Fork | Suntour XCM-ATB Coil 80mm suspension travel |
Bottom bracket | included |
Front brakes | Shimano MT-401-3A 2 piston Shimano RT30 180 mm rotor |
Rear brakes | Shimano MT-401-3A 2 piston Shimano RT30 180 mm rotor |
Brakes | Hydraulic disc brakes |
Crankset | EP01A-SHE80-U0-C50-NWP203-38T-NS 38 teeth Shimano FC-E6100 170 mm-S/M, 175 mm-L Sunnywheel SW-CG-173A chainguard |
Rear derailleurs | Shimano Deore Shadow+ |
Grips | MERIDA EXPERT TK |
Handlebars | MERIDA EXPERT TK Aluminium 640mm width 35mm rise |
Stem | MERIDA EXPERT TK Aluminium 640mm width 35mm rise |
Headset | MERIDA 2346 Neck |
Front hub | Shimano Deore 100x9mm width front hub 32 spoke holes Centerlock |
Rear hub | Shimano Deore 135x9mm width rear hub 36 spoke holes Centerlock |
Loan calculator | |
---|---|
Similar products
If you have any questions or suggestions, you can contact us by chat or phone +371 2201 8353!
In order to leave a comment, please sign in.
Sign in