Lanyard Arbo Site 5.5m

Work positioning lanyard specially intended for tree care operations.

allows smooth length adjustment thanks to the use of friction knots (Prusik knot) and pulleys
two strength stitched eyes which allow to create two independent work positioning lanyards
each component is replaceable in case of damage
Work positioning set includes:

PATRON LANYARD - CE 1019, EN 795B, EN 354
TIMBER ACCESSORY CORD (8 mm, 75 cm) - CE 1019, EN 795B
pulley MIKY - CE 1019, EN 12278
2x carabiner OXY triple lock (black) - CE 1019, EN 362, EN 12275
Note: This set is not certified according to EN 358, as it consists of removable components. However, it is generally recognized according to Arboricultural Organizations (ISAs) and working practices.

PATRON LANYARD
Dynamic rope lanyard with stitched eyes at the ends for work positioning and anchoring at the tree care.

suitable to use with the mechanical adjustment devices and also with friction hitches (Prusik knot)
dynamic rope 11.4 mm guarantees smooth adjustment and in case of fall higher impact force absorption
strength stitching is covered with a plastic cover for higher abrasion resistance and easier pulling from the tree top
suitable also for other work at height as an anchor device

TIMBER ACCESSORY CORD (8 mm, 75 cm)
Rope with sewn eyes.

stitched eye at both ends
use of the PES/TECHNORA material combination results in a better thermal and mechanical resistance of the sheath
Diameter: 8 mm
Length: 75 cm
Strength: 18 kN

pulley MIKY
Lightweight pulley with two attachment holes Designed for tree climbing application. Suitable for use with Prusik friction knot.

two attachment holes with strength 28 kN
anodized aluminum alloy side plates
aluminum alloy sheave for textile ropes and auxiliary cords up to 13 mm in diameter
bronze self lubricating bearing ensures reliable efficiency up to 81 %
unique production number marking

OXY triple lock (black)
Hot-forged light alloy oval carabiner designed to be used especially with pulleys, ascenders and descenders.

triple action gate lock
rough notches on the locking sleeve for easy manipulation
angled snag free Keylock nose for smooth clipping and unclipping
hot-forged I-beam construction makes the carabiner extremely strong, stiff and light
almost oval shape makes the carabiner easy to turn around in device´s attachment points, anchors or slings
thanks to the oval shape, pulleys attached are loaded symmetrically
large rope bearing area for better rope glide and reduced wear of the carabiner
each carabiner is individually tested for a strength of 10 kN
unique production number

Material light alloy (anodized)
Strength major axis 26 kN
Strength minor axis 8 kN
Strength open gate 7 kN
Gate opening (d) 21 mm